Self-Adhesive Strips (4 pairs pack)

Pixelbrick Self-Adhesive Mounting Strips are an easy and secure way to attach your Brick Mosaic baseplates directly to the wall — without a frame, nails, screws, or tools.

Made from a durable nylon and polyester material, the white Nano Strips use a strong, removable adhesive to keep your mosaic firmly in place while remaining removable from most suitable surfaces.

• No tools required — no nails, screws, drilling, or hammering

• Strong self-adhesive backing for reliable, long-lasting mounting

• Removable adhesive designed for easier removal

• Removable from most walls without damage*

• No glue needed and minimal sticky residue after removal**

• Suitable for most smooth surfaces, including painted walls, tiles, metal, and wood

• Durable nylon + polyester construction

• Easy to apply in just a few steps

Colour: White
Contents: 1 pack = 4 mounting strips

Recommendation: Use 4 strips per baseplate, placing one strip in each corner.

How to apply

Make sure both the wall and the back of the baseplate are clean, dry, and free from dust or grease.

Peel off the protective film from one side of the strip and press it firmly onto the back of the baseplate. Then remove the second protective film and carefully position the baseplate against the wall. Press firmly to ensure good contact.

Mosaics with multiple baseplates

For the cleanest result, we recommend attaching each baseplate to the wall separately and carefully aligning them so the complete mosaic fits together seamlessly.

Start with the bottom row and work your way upwards. This makes it easier to keep all baseplates straight and properly aligned.

Suitable surfaces

The strips work best on smooth, solid surfaces, such as:

• Painted walls

• Tiles

• Metal

• Smooth wood

Do not use the strips on wallpaper, fabric, vinyl, textured surfaces, weak or damaged paint, or other delicate surfaces.

They are also not recommended for mounting objects that extend more than approximately 5 cm from the wall.

* Removal without damage depends on the type and condition of the surface. Always remove the strips slowly and carefully using a steady, even pulling motion.

** If adhesive residue remains after removing the baseplate, it can usually be removed more easily once the plate is off the wall. If necessary, gently warm the residue using a hair dryer on the wall only. Do not apply heat to the Pixelbrick baseplate or bricks.